Amada er stærsti framleiðandi heims á járnsmíðavélum og leiðandi í plötuvinnslu með
kantpressum og leiserskurðarvélum.
Nýja línan af kantpressum: HG – Hybrid drive – er með raf/vökva (servo-hydraulic) drifi sem gefur hraða, einstaka nákvæmni og er um leið hljóðlát og þægileg í vinnu.
HG línan getur verið með sjálfvirkum verkfærarskipti, sem gerir flókna vinnu í litlum lotum, algerlega sjálfvirka.
Viðskiptavinir okkar eru með 3-5 og 7 ása
Amada kantpressur í notkun.
| SPECIFICATIONS HG-SERIES | 5020 | 8025 | 1003 | 1303 | 1703 | 1704 | 2203 | 2204 | 1704 L |
|---|---|---|---|---|---|---|---|---|---|
| Tonnage (kN) | 500 | 800 | 1000 | 1300 | 1700 | 1700 | 2200 | 2200 | 1700 |
| Beam length (mm) | 2150 | 2600 | 3110 | 3110 | 3110 | 4280 | 3110 | 4280 | 4280 |
| Distance between the frames (mm) | 1780 | 2210 | 2740 | 2740 | 2740 | 3780 | 2740 | 3780 | 3780 |
| Number of cylinders (crowning) | 2 (2) | 2 (2) | 2 (2) | 2 (2) | 2 (3) | 2 (3) | 2 (3) | 2 (3) | 2 (3) |
| Stroke (mm) | 250 | 250 | 250 | 250 | 250 | 250 | 250 | 250 | 350 |
| Open height (mm) | 520 | 520 | 520 | 520 | 520 | 520 | 520 | 520 | 650 |
| Throath depth (mm) | 450 |
| Table height (mm) | 950 |
| Approach speed Y (mm/s) | 220 |
| Bending speed Y (mm/s) | 25 |
| Return speed Y (mm) | 250 |
| Number of controlled axes (incl. Δ-X) | 9 (11) |
| BACK GAUGE DATA | 5020 | 8025 | 1003 | 1303 | 1703 | 1704 | 2203 | 2204 | 1704 L |
|---|---|---|---|---|---|---|---|---|---|
| Maximum tilt value of upper beam (mm) | +/- 10 | +/- 12.5 | +/- 15 | +/- 15 | +/- 15 | +/- 15 | +/- 15 | +/- 25 | +/- 25 |
| Maximum tilt value of X-axes (mm) | 320 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 |
| Adjustable range Δ-X (mm) | +/- 150 |
| Adjustable range X-axis (mm) | 700 |
| Adjustable range R-axis (mm) | 250 |
| Maximum speed X (mm/s) | 500 |
| Maximum speed R (mm/s) | 330 |
| Maximum speed Z (mm/s) | 1500 |
| Input increment of Y-axes (mm) | 0.001 |
| Input increment of X-axes (mm) | 0.01 |
| Input increment of R-axis (mm) | 0.1 |
| Input increment of Z-axes (mm) | 0.1 |
| Adjustable range of crowning system (%) | 0 – 400 |
| AXES COMPARISON AMCO / AESA |
JP | EU | HD VALUE |
|---|---|---|---|
| Cylinder stroke | D 1+2 | Y 1+2 | 250/350 |
| Depth value of back gauge | L 1+2 | X 1-2 | 700 |
| Lateral movement of the back gauge fingers | Y 1-2 | Z 1-2 | various |
| Height adjustment of the back gauge cross beam | Z 1-2 | R (1+2) | 30-280 |
Technical changes are reserved. All Dimensions +/- 10 mm
