ZMM eru hágæða rennibekkir sem hafa verið í notkun á Íslandi síðan 1980
Allt frá manual bekkjum uppí alsjálfvirka CNC bekki
Hér má sjá fleiri gerðir ZMM rennibekkja: https://zmmbulgaria.com/en/
_____
CU 325 | ||
|---|---|---|
CAPACITY | ||
| HEIGHT OF CENTERS | mm | 165 |
| SWING OVER BED | mm | 325 |
| SWING OVER CROSS SLIDE | mm | 440 |
| SWING IN GAP – ONLY DBC 1000 | m | 190 |
| WIDTH OF BED | mm | 200 |
| DISTANCE BETWEEN CENTERS | mm | 500; 750; 1000 |
SPINDLE | ||
| SPINDLE NOSE DIN 55027 | No. | 5 |
| SPINDLE BORE | mm | 32 |
| SPINDLE TAPER | Metric | No. 4.5 |
HEAD STOCK | ||
| NUMBER OF SPINDLE SPEEDS | 12 (24) | |
| SPINDLE SPEED RANGES | rpm | 85 – 2000 ( 42.5 – 2000 ) ** |
| MAIN MOTOR POWER | kW | 2.2 |
FEEDS | ||
| NUMBER OF FEEDS | 48 | |
| LONGITUDINAL FEED RANGE | mm/rev | 0.006 – 1.77 |
| CROSS FEED RANGE | mm/rev | 0.003 – 0.885 |
THREADS | ||
| NUMBER OF THREADS | As below | |
| METRIC THREAD RANGE | mm | ( 48 ) 0.1 – 28 |
| INCH THREAD RANGE | Tp | (53) 75 – 2.5 |
| MODULE THREAD RANGE | Module | ( 19 ) 0.1 – 1.75 |
| DP THREAD RANGE | DP | (19) 70 – 4 |
CARRIAGE | ||
| CROSS SLIDE TRAVEL | mm | 150 |
| TOP SLIDE TRAVEL | mm | 95 |
TAIL STOCK | ||
| QUILL DIAMETER | mm | 40 |
| QUILL TAPER | Morse | No. 3 |
| QUILL TRAVEL | mm | 100 |
WEIGHT | ||
| FOR DBC 1000 MM | kg | 770 |
**Only for two-speed motor execution
_____
Files :
_____
THE ADVANTAGES of our universal lathes :
BED :
Heavy, highly ribbed, and rigid bed casting made of strong gray cast-iron which prevents any vibrations when the machine is properly leveled and operated.
Double prismatic, induction hardened and precisely ground guide ways
Built-in gap bridge which might be removed for processing large work pieces.
HEADSTOCK :
The stable, properly ribbed and precisely processed headstock casting provides a non-vibrating and accurate operation while the lathe processes parts at high speed or during heavy duty machining regime.
The grinded gears are made of induction hardened case-hardening steel and they are working in an oil bath.
The spindle is hardened, precisely ground and balanced; it has a standard version of the hole and the spindle face, including Cam lock performance, direct mounting of 3-jaw self-centered, 4-jaw independent chucks, face plates without jaws or fastening of the chucks with flange connector.
The spindle bearings may use bearings from SKF, FAG, NSK with bearing set assembling preload. This bearing provides high accuracy of the machine’s work for an indefinite period of time.
LATHE APRON :
Mechanized transverse and longitudinal movements.
A built-in safety mechanism against overloading.
A locking device against simultaneous switching of the nut to the lead screw and automatic feeding.
Quick moves in both axes.
FEED GEARBOX :
When processing a certain part, the feed gearbox provides various feedings and steps for threading – metric, inch, module, and DP threads. It is designed in such a way that its control is primarily convenient.
Rennibekkir Archives – Fálkinn Ísmar og Iðnvélar (idnvelar.is)
